Gestetner c7528 操作指南
Using a Printer Server
274
❒ For details about passwords, consult your network administrator.
F
Click [Configuration] in the left area, click [Network], and then click [NetWare].
The following items are displayed:
• Print Server Name: Enter the NetWare print server name. To use the inter-
face board as a print server, enter the name of a print server that is not ac-
tive on the file server. Use up to 47 single byte characters.
tive on the file server. Use up to 47 single byte characters.
• Logon Mode: Specify whether to designate a file server or NDS tree when
logging on to NetWare.
• File Server Name: When a file server name is entered here, only the spec-
ified file server is searched for. This item is mandatory. Use up to 47 single
byte characters.
byte characters.
• NDS Tree: If you want to enable NDS mode, enter the name of the NDS
tree you want to log on to. Use up to 32 single byte alphanumeric charac-
ters.
ters.
• NDS Context Name: If you want to enable NDS mode, enter the print serv-
er context using up to 127 characters.
• Operation mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote printer number: This item is effective when you have specified that
the interface board be used as a remote printer. Enter the same number as
the number of the printer to be created on the print server, using 0 to 254
one-byte characters.
the number of the printer to be created on the print server, using 0 to 254
one-byte characters.
• Job Timeout: When the interface board is running as a NetWare remote
printer, the printer cannot judge when a print job ends. Therefore, the print-
er terminates printing when a certain period of time has elapsed since it re-
ceived print data (i.e., when it has not received print data for a certain
period of time). Specify this period of time (3 to 255 seconds) using single
byte characters. The default value is 15 (seconds).
er terminates printing when a certain period of time has elapsed since it re-
ceived print data (i.e., when it has not received print data for a certain
period of time). Specify this period of time (3 to 255 seconds) using single
byte characters. The default value is 15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down
menu.
• NCP Distribution Protocol: Select the protocol for NCP distribution.
G
Confirm the settings, and then click [Apply].
Configuration is now complete. Wait for several minutes if you want to restart
Web Image Monitor.
Web Image Monitor.
H
To check that the configuration is made correctly, enter the following from
the command prompt.
the command prompt.
F:> NLIST USER /A/B