Infocus IN24 参考指南
29
Presets
: Presets are provided that optimize the projector for displaying
computer presentations, film images, and video images. Film input is mate-
rial originally captured on a film camera, like a movie; video input is mate-
rial originally captured on a video camera, like a TV show or sporting event.
rial originally captured on a film camera, like a movie; video input is mate-
rial originally captured on a video camera, like a TV show or sporting event.
There are also user-definable presets. To set a preset for the current source,
adjust the image, select Save Settings in the Presets menu, then select Save
User 1 (or 2 or 3). You can recall these settings in the future by selecting the
User 1 preset. If you select User Presets then further adjust the image, Pre-
sets Off will automatically be selected in the Preset menu to indicate
changes have been made.
adjust the image, select Save Settings in the Presets menu, then select Save
User 1 (or 2 or 3). You can recall these settings in the future by selecting the
User 1 preset. If you select User Presets then further adjust the image, Pre-
sets Off will automatically be selected in the Preset menu to indicate
changes have been made.
To restore the factory default settings, choose Factory Reset in the Set-
tings>Service
tings>Service
menu (page 33).
Advanced menu
The following four (4) options are for progressive and computer sources.
Phase
: adjusts the horizontal phase of a computer source.
Tracking
: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position
: adjusts the position of a computer source.
Sync Threshold Adjust
: (progressive signals only) If a hardware device,
such as a DVD player, is not syncing properly with the projector, select this
option to help it to sync when connected to the projector.
option to help it to sync when connected to the projector.
White Peaking
: (video sources only) increases the brightness of whites that
are near 100%.
Overscan
: removes noise around the video image.
Presets
Save
User
Settings
User
Settings
Advanced menu