ICOM IC-7000 说明手册
14
1
PANEL DESCRIPTION
1
!1
SPLIT INDICATOR
(pgs. 89, 90)
Appears during split operation.
!2
IF FILTER INDICA
TOR
(p. 75)
Shows the selected IF filter number.
!3
PASSBAND WIDTH INDICATO
R
(p. 75, 77)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
PBT operation and center frequency for IF shift op-
eration.
!4
MODE INDICATORS
(p. 34)
Shows the selected operating mode.
• “-R” appears when CW reverse or RTTY reverse mode
is selected.
!5
PROGRAMMABLE/1 MHz TUNING STEP
INDICATORS
INDICATORS
➥
!5
a appears when the 1 MHz quick tuning step is
selected.
(p. 31)
➥
!5
b appears when the programmable tuning step
is selected.
(p. 30)
!6
FUNCTION INDICATORS
➥“
” appears when the VOX function is acti-
vated.
(p. 83)
➥“
” appears when full break-in operation is se-
lected and “
” appears when semi break-in
operation is selected.
(p. 85)
➥“
” appears when the speech compressor is
activated.
(p. 87)
➥“
,” “
,” “
” or “
” (OFF)
appears when the fast time constant, middle time
constant, slow time constant or AGC OFF is se-
lected, respectively.
constant, slow time constant or AGC OFF is se-
lected, respectively.
(p. 74)
➥
“
”
appears when the VSC (Voice Squelch
Control) function is activated in phone (SSB, AM,
FM, WFM) modes.
FM, WFM) modes.
(p. 82)
➥
“
” appears for negative offset and “
”
appears for positive offset during duplex opera-
tion.
tion.
(p. 63)
➥
“
”
appears when the 9600 baud mode is ac-
tivated for packet operation.
(p. 116)
➥
“
” appears when the preamp is ON,
“
”
appears when the 12 dB attenuator is
ON.
(p. 72)
➥
“
” or “
”
appears when the RIT or ∂TX
function is activated.
(pgs. 73, 86)
➥“
” appears when the noise blanker is acti-
vated.
(p. 78)
➥
“
”
appears when DSP noise reduction is acti-
vated.
(p. 79)
➥
“
”
appears when the manual notch function is
activated.
(p. 81)
➥
“
”
appears when the automatic notch function
is activated.
(p. 80)
!7
MULTI-FUNCTION SCREEN
Shows
the screens for the multi-function meter,
sim-
ple band scope, SWR meter, memory channel,
voice recorder, memory keyer, DTMF memory en-
coder, RTTY decoder, IF filter selection or popup in-
dication, etc.
voice recorder, memory keyer, DTMF memory en-
coder, RTTY decoder, IF filter selection or popup in-
dication, etc.
!8
PRIORITY WATCH INDICATOR
(p. 113)
Appears while priority scan is activated.
!9
SELECT MEMORY CHANNEL INDICATOR
(p. 113)
Appears when select scan is enabled for the se-
lected memory channel.
lected memory channel.
@0
1/4 FUNCTION
INDICATOR
(p. 32)
Appears when the
1
⁄
4
-speed tuning function is acti-
vated in CW and RTTY modes.
@1
EXTERNAL KEYPAD INDICATOR
Shows the memory keyer or voice memory channel
number. This indication appears when “E
number. This indication appears when “E
Ex
xt
te
er
rn
na
al
l
K
Ke
ey
yp
p
a
ad
d
(
(V
VO
OI
IC
CE
E)
)” or “E
Ex
xt
te
er
rn
na
al
l
K
Ke
ey
yp
pa
ad
d
(
(K
KE
EY
YE
ER
R)
)” in the miscellaneous (others) set mode
(p. 135) is set to
ON, and which one is activated.
<Example>
•
“
”
appears when the memory keyer “M2” is trans-
mitted.
•
“
”
appears when the voice memory “T1” is transmit-
ted.
@2
CLOCK READOUT
(p. 117)
Shows the current time.
• UTC time or local time can be selected.
@3
TONE
INDICATOR
(pgs. 60,, 61, 64)
Appears during FM tone operation.
•
“
,” “
” or “
”
appears when the repeater
tone, tone squelch, DTCS squelch are activated, re-
spectively.
spectively.
@4
TUNER
INDICATOR
(pgs. 114, 115)
Appears when the optional automatic antenna tuner
is activated.
is activated.
• This indicator blinks while the tuner is tuning.
∂TX
RIT