ICOM IC-7000 说明手册

2

16

INSTALLATION AND CONNECTIONS

■

D

D

*CAUTION: Non-supplied screws (longer than 8 mm)

may damage the internal units.

MB-62
(optional)

Supplied with
the MB-62*

Nut

Spring washer

Flat washer

Pull back

then up

D

D

q While pulling the front panel latch towards you,

slide the front panel to the left (fig. 1).

w Attach the optional OPC-1443 to the main body

and tighten the supplied screw as in fig. 2.

e Attach the other end of the OPC-1443 to the de-

tached front panel as in fig. 3.

detach/attach the front panel

when connecting the DC power supply (or battery).
Be sure to disconnect the DC power cable from the

socket on the transceiver rear panel.

q Attach the MB-105 to a flat surface using the four

supplied screws (fig. 1).

w Fix the detached front panel to the MB-105 as il-

lustrated in fig. 2.

to mount the MB-105 so that the

front panel attaches with the correct side up.

Separation cable
(OPC-1443)

Separation cable
(OPC-1443)

To remove

fig. 1

fig. 2

fig. 3

Latch

fig. 1

fig. 2

With the transceiver upside down, pull the stand to-
wards the rear panel and then upwards, as illus-
trated below.