ICOM IC-7000 说明手册
30
3
BASIC OPERATION
3
D
D
Programmable tuning step
The operating frequency can be changed in steps of
(0.01 (AM/FM/WFM only), 0.1, 1, 5, 9, 10, 12.5, 20,
25 or 100 kHz selectable) for quick tuning.
(0.01 (AM/FM/WFM only), 0.1, 1, 5, 9, 10, 12.5, 20,
25 or 100 kHz selectable) for quick tuning.
q Push
[TS]
momentarily to turn the programmable
tuning function ON.
• “Z” appears when the programmable tuning function is
ON.
w Rotate
[DIAL]
to change the frequency in pro-
grammed kHz steps.
e Push
[TS]
again to turn the programmable tuning
function OFF.
• “Z” disappears.
r Rotate
[DIAL]
for normal tuning, if desired.
Programmable tuning step indicator
[TS] [DIAL]
Appears
D
D
Selecting “kHz” step
Programmable tuning steps are available to suit your
operating requirements.
These tuning steps are:
operating requirements.
These tuning steps are:
• Independently selectable for each mode
• Selectable from 0.01 (AM/FM/WFM only), 0.1, 1, 5,
• Selectable from 0.01 (AM/FM/WFM only), 0.1, 1, 5,
9, 10, 12.5, 20, 25 and 100 kHz
q Push
[TS]
momentarily to turn the programmable
tuning step ON.
• “Z” appears when the programmable tuning function is
ON.
w Push and hold
[TS]
for 1 sec. to enter the tuning
step setting display.
• The tuning step setting for the selected mode appears.
e Select the desired operating mode with
[MODE]
.
(see p. 34)
r Rotate
[DIAL]
to select the desired tuning step
from 0.01 (FM/WFM/AM only), 0.1, 1, 5, 9, 10,
12.5, 20, 25 or 100 kHz.
12.5, 20, 25 or 100 kHz.
• Push and hold
[F-4
D
DE
EF
F
]
for 1 sec. to return to the de-
fault setting, if desired.
t Repeat steps e and r to select the “kHz” tuning
steps for other modes, if desired.
y Push
[TS]
(or
[
Z
Z
(
MENU
/
GRP
)]
) to exit the setting
display.
Appears
[TS]
[MODE]
[DIAL]