ICOM IC-7000 说明手册
41
4
RECEIVE AND TRANSMIT
■
Operating CW
q Connect a paddle or straight key as on page 22.
w Push
w Push
[
Y
Y
(
BAND
)]
/
[
Z
Z
(
BAND
)]
to select the desired
band or push a band key on the HM-151.
e Push
[MODE]
momentarily to select CW mode.
• After CW mode is selected, push and hold
[MODE]
for
1 sec. to toggle between CW and CW-R modes.
r Rotate
[DIAL]
to tune in a desired signal with the
desired tone frequency.
t Rotate
[AF]
to set audio to a comfortable listening
level.
y Set CW break-in operation as semi break-in, full
break-in or OFF.
• Push
[F-1
B
BR
RK
K
]
one or more times to select the CW
break-in operation.
• “
,” “
,” and “OFF (no indication)” appears.
➧BK-IN: semi break-in
➧F-BK : full break-in
➧OFF : no break-in (ACC socket connection is neces-
sary as shown on page 22.)
u Set the CW delay time when semi break-in opera-
tion is selected.
• Push and hold
[F-1
B
BR
RK
K
]
for 1 sec. to enter the break-
in delay time set mode.
• Rotate
[DIAL]
to set the desired delay time.
i Set CW setting in the keyer set mode (S
S--1
1).
• Push
[F-2
K
KE
EY
Y
]
,
[
Z
Z
(
MENU
/
GRP
)]
, then
[F-4
S
SE
ET
T
]
to
enter the keyer set mode. (p. 49)
o Keying to transmit, use the electric keyer or paddle
to send your CW signals.
•
[TX]
indicator lights red.
• The Po meter indicates transmitted CW signal strength.
!0 Stop keying to return to receive.
Delay time of 7.5 dots is selected
for semi break-in operation.
for semi break-in operation.
Semi break-in operation is selected.
Appears
“CW” or “CW-R” appears
[
Y
]
[
Z
]
[DIAL]
[MODE]
[AF]
[TX] indicator
[MENU/GRP]
[F-4]
[F-1] [F-2]
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group S
S.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu S
S--1
1.
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group M
M.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu M
M--3
3.