Omnitron iConverter XG 8599-01-B 用户手册

Page 3

 XG and XG+

iConverter XG and XG+

10G Ethernet, 10G SONET/SDH,

10G Fiber Channel and 10G OTN (G.709)

SFP+ Models:

XFP/XFP Model:

9.95Gbps to 10.71Gbps

9.95Gbps to 11.32Gbps

XG supports all XFP transceivers up to 3.5 watts

Up to a maximum of 6.0 watts

XG+ supports high powered XFP transceivers > 3.5 watts

Up to a maximum of 11.0 watts (maximum 5.5 watts per port)

XG+ provides manageability of tunable XFP transceivers

Fiber Connector LC (via XFP or SFP+)
Copper 

CX4 (via XFP)

UL, FCC Class A, CE, NEBS 3 Compliant, SFF-8077, SFF-8477

Typical:

1.1A @ 3.3VDC

DC Power Input Connector:

2.5mm Barrel Connector or

2-Pin Terminal Connector

DC Power:

7 - 60VDC

XG: 

1.2A @ 9VDC

0.9A @ 12VDC

XG+: 

1.5A @ 9VDC

1.1A @ 12VDC

AC Power Adapter (US)

via 2.5mm Barrel Connector:

100 - 120VAC/60Hz

0.20A @ 120VAC

AC Power Adapter (Universal)

via 2.5mm Barrel Connector:

100- 240VAC/50 - 60Hz

0.20A @ 120VAC

Plug-in:

Standalone:

Wall-mount:

W:0.85” x D:4.5” x H:2.8”

W:3.1” x D:4.8” x H:1.0”

W:3.8” x D:4.8” x H:1.0”

Standard:

Wide:

Extended:

Storage:

0 to 50° C

-40 to 60° C

-40 to 75° C

-40 to 80° C

Plug-in:

Standalone 

without power adapter:

Standalone 

with power adapter:

8.0 oz

1.0 lb

1.5 lb

5 to 95% (non-condensing)

-100m to 4000m

Plug-in:

Standalone 

without power adapter:

Standalone 

with US power adapter:

Standalone with 

Universal power adapter:

770,000

918,000

250,000
100,000

Tunable  XFP  transceivers  are  configurable  to  support  a 

specific channel in a DWDM optical network.  Tunable XFPs 

allow  network  operators  to  remotely  change  wavelengths 

(channel paths) when they need to redistribute bandwidth, or 

reconfigure/upgrade traffic patterns and services.  
The  iConverter  XG+  management  system  supports  the 

configuration of these tunable XFPs.  When the XG+ is used in 

conjunction with an iConverter management module, it provides 

a user interface that allows the network operator to change the 

DWDM channel of the transceiver, eliminating the need to be 

physically on-site with external programming equipment.
In addition to changing the DWDM channel by specifying the 

wavelength or the transceiver-specific channel ID, the DWDM 

channel can be selected by inputting the industry-accepted 

ITU channel number.
Using tunable transceivers not only ensures quick responses to 

changes in network topology, it also lowers OpEx and CapEx 

by reducing truck rolls and eliminating up to hundreds of fixed-

wavelength DWDM XFP transceivers from spares inventory.

OTN Long-Haul DWDM Application
This application shows three 10G DWDM connections across 

an OTN network.  Three iConverter XG modules with high-

power XFPs are installed in a 5-Module Chassis and connected 

with fiber patch cables to DWDM Multiplexer.  The iConverter 

XG  modules  function  as  fiber  repeaters  and  wavelength 

transponders. The high-power XFPs perform Forward Error 

Correction  on  the  incoming  signal,  then  amplify  and  re-

encapsulate the outbound OTN signal.