Avaya 10bs 用户指南
16
Often-Used Features
-
Last Number Dial
-
To program:
See Programming Buttons & Settings, p. 20.
This feature automatically redials the last number you called. You should program Last Number Dial
on a button.
See Programming Buttons & Settings, p. 20.
This feature automatically redials the last number you called. You should program Last Number Dial
on a button.
To use:
1. Press the same type of line button used to place the first call (for example, ICOM or SA).
2. Press the Last Number Dial button,
1. Press the same type of line button used to place the first call (for example, ICOM or SA).
2. Press the Last Number Dial button,
OR
Press the programmed Feature button and dial 84.
Press the programmed Feature button and dial 84.
-
Night Service
-
Your company may use Night Service to treat calls differently after hours. If Night Service is on,
you may not be able to make outside calls, or you may need a password to do so. See your system
manager for a password and/or emergency numbers you can dial without a password.
you may not be able to make outside calls, or you may need a password to do so. See your system
manager for a password and/or emergency numbers you can dial without a password.
To make an outside call and override Night Service:*
1. Press the Hold button and dial the password.
2. Lift the handset or press the Spkrphone button and dial the call.
1. Press the Hold button and dial the password.
2. Lift the handset or press the Spkrphone button and dial the call.
* You cannot override Night Service on an MLC-5.
-
Paging*
-
To program:
See Programming Buttons & Settings, p. 20.
You can page an individual at his or her phone by using an ICOM Voice or SA Voice button (see
Line Buttons, p. 2). Or you may be able to page all speakerphones or groups of speakerphones,
depending upon how your system is set up. If your company has a loudspeaker paging system, use it
to page the whole company or just people in a certain paging zone.
See Programming Buttons & Settings, p. 20.
You can page an individual at his or her phone by using an ICOM Voice or SA Voice button (see
Line Buttons, p. 2). Or you may be able to page all speakerphones or groups of speakerphones,
depending upon how your system is set up. If your company has a loudspeaker paging system, use it
to page the whole company or just people in a certain paging zone.
To program or use Speakerphone Paging,
check with your system manager for Group
Paging or Page All numbers, then:
1. Press any ICOM or SA button and lift the
check with your system manager for Group
Paging or Page All numbers, then:
1. Press any ICOM or SA button and lift the
handset.
2. Dial the Group Paging or Page All number,
OR
Press the button you programmed for
Group Paging or Page All.
Press the button you programmed for
Group Paging or Page All.
3. After the beep, make the announcement and
hang up.
Ask your system manager whether
Loudspeaker Paging is available and if there is
a list of paging zones. To use:
1. Press any ICOM or SA button and lift the
Loudspeaker Paging is available and if there is
a list of paging zones. To use:
1. Press any ICOM or SA button and lift the
handset.
2. Press the programmed Feature button.
3. Dial 9, the loudspeaker line number, and
3. Dial 9, the loudspeaker line number, and
zone (if necessary).
4. Make the announcement and hang up.
To use when a button is programmed:
1. Lift the handset and press the programmed
To use when a button is programmed:
1. Lift the handset and press the programmed
button.
2. Dial the zone, if necessary.
3. Make the announcement and hang up.
3. Make the announcement and hang up.
*
MLC-5 users can make but not receive speakerphone paging calls. To make loudspeaker paging broadcasts,
MLC-5 users must have a programmed Loudspeaker Paging button. MLC-5 users cannot be in paging groups.
Anal Multi pp14-20
4/11/97, 10:07 AM
16