Avaya 10bs 用户指南
17
Often-Used Features
To use Park and Paging:
1. Park the call.
1. Park the call.
• Press the Park button you programmed,
OR
• Press the Transfer button, dial your
extension, and press Transfer again.
2. Set up the page.
•
For Speakerphone Paging:
a) Press the appropriate Group Page or
a) Press the appropriate Group Page or
Page All button,
OR
Press any ICOM or SA button and dial
the Group Page or Page All extension.
OR
Press any ICOM or SA button and dial
the Group Page or Page All extension.
b) Announce the call and give your
extension.
•
For Loudspeaker Paging:
a) Press the programmed Loudspeaker
a) Press the programmed Loudspeaker
Paging button,
OR
Press the programmed Feature button,
dial 9 and the loudspeaker paging
number. If necessary, dial the zone.
OR
Press the programmed Feature button,
dial 9 and the loudspeaker paging
number. If necessary, dial the zone.
b) Announce the call and give your
extension.
3. Hang up.
To pick up a parked call:
1. Lift the handset.
2. Press the programmed Pickup button,
To pick up a parked call:
1. Lift the handset.
2. Press the programmed Pickup button,
OR
Press the programmed Feature button and
dial 9.
Press the programmed Feature button and
dial 9.
3. Dial the extension where the call is parked.
-
Park & Pickup
-
To program:
See Programming Buttons & Settings, p. 20.
Park puts a call on a special kind of hold so that it can be answered from any phone in the system.
While a call is parked, use Paging to summon the co-worker who should answer. The person picks up
the call using Pickup (p. 18) and dialing your extension.
See Programming Buttons & Settings, p. 20.
Park puts a call on a special kind of hold so that it can be answered from any phone in the system.
While a call is parked, use Paging to summon the co-worker who should answer. The person picks up
the call using Pickup (p. 18) and dialing your extension.
-
Personal Speed Dial
-
For BIS-10 and MLC-5. Use Auto Dial (p. 12) for other phones.
Use this feature to program 2-digit codes that you can dial in place of frequently used numbers.
Include the complete dialing sequence and press and release the Hold button to enter a dialing pause.
You can program up to 24 numbers using 2-digit codes. You cannot program an account code
together with a phone number in a Personal Speed Dial code.
Use this feature to program 2-digit codes that you can dial in place of frequently used numbers.
Include the complete dialing sequence and press and release the Hold button to enter a dialing pause.
You can program up to 24 numbers using 2-digit codes. You cannot program an account code
together with a phone number in a Personal Speed Dial code.
To program Personal Speed Dial codes:
1. Slide the T/P switch to P.
2. Dial # and the 2-digit code (01–24); then dial
1. Slide the T/P switch to P.
2. Dial # and the 2-digit code (01–24); then dial
✻21.
3. Dial the phone number. Dial entire sequence,
including dial-out code. If you need special
characters, see p. 20.
characters, see p. 20.
4. Repeat Steps 2 and 3 for additional codes.
5. Slide the T/P switch to center.
To use:
1. Select the line button.
2. Press the programmed Feature button.
3. Dial the 2-digit code (01–24).
5. Slide the T/P switch to center.
To use:
1. Select the line button.
2. Press the programmed Feature button.
3. Dial the 2-digit code (01–24).
Anal Multi pp14-20
4/11/97, 10:07 AM
17