Epson EPL-N2000 用户手册
Using the Control Panel 3-5
Using OneTouch Modes
The OneTouch modes provide the easiest way to change the
most common settings. There are two OneTouch modes, each
with four settings shown on the top two lines of the control
panel. The settings are described in the table on 3-6.
most common settings. There are two OneTouch modes, each
with four settings shown on the top two lines of the control
panel. The settings are described in the table on 3-6.
Follow these steps to change a setting using OneTouch modes:
1. Make sure the printer is turned on and the On Line light
is on.
2. To change a mode 1 setting, press the SelecType button
until the light next to the
Paper Source
setting comes on.
To change a mode 2 setting, press SelecType
until the light
next to the
RITech
setting comes on.
3. The current values for all four settings appear in the control
panel display above the setting labels. Press the button
beneath the setting you want to change until the value you
want appears in the display. (To move backward through
the options, hold down Alt
beneath the setting you want to change until the value you
want appears in the display. (To move backward through
the options, hold down Alt
and the button for the setting.)
4. To save your changes and exit the OneTouch mode, press
the On Line button.
To save your changes and move to the other OneTouch
mode, press the SelecType button; then make your changes
and press
mode, press the SelecType button; then make your changes
and press
On Line to exit.
mode 1 settings
mode 2 settings