Epson EPL-N2000 用户手册
3-6
Using the Control Panel
OneTouch Mode Settings
The table below lists the options available for each OneTouch
mode setting. Default settings are shown in bold
mode setting. Default settings are shown in bold
type.
*
Not all page sizes are supported by the Duplex Unit or the paper cassettes.
See Appendix A for details on which page sizes are supported by each of
the printer’s paper sources.
See Appendix A for details on which page sizes are supported by each of
the printer’s paper sources.
OneTouch mode setting options
Setting
Options
Description
Paper Source
Auto
MP (built-in tray)
LC1 (lower cassette 1)
LC2 (lower cassette 2)
MP (built-in tray)
LC1 (lower cassette 1)
LC2 (lower cassette 2)
Selects the tray to load paper
from; Auto loads from the tray
containing paper that matches
the Page Size setting below
from; Auto loads from the tray
containing paper that matches
the Page Size setting below
Page Size
A3, A3+, A4, A5, B4, B5,
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5,
CTM *
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5,
CTM *
Selects the page size of the
image to be produced
image to be produced
Manual Feed
On
Off
Off
Turns manual feed mode on or
off for the built-in paper tray;
see Chapter 1 for instructions
off for the built-in paper tray;
see Chapter 1 for instructions
Orientation
Portrait
Landscape
Landscape
Selects the print direction on
the page
the page
RITech
Dark
Medium
Light
Off
Medium
Light
Off
Sets the RITech (Resolution
Improvement Technology)
setting for your print job; see
Chapter 5 for details
Improvement Technology)
setting for your print job; see
Chapter 5 for details
Copies
1 to 999
Selects the number of copies to
print
MP Tray Size
A3, A3+, A4, A5, B4, B5,
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, *
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, *
Selects the size of paper
loaded in the built-in paper tray
loaded in the built-in paper tray
Toner Save
On
Off
Off
Sets the amount of toner used
in your print job; for draft
copies, set to On to use
approximately 50% less toner
for a lighter printout
in your print job; for draft
copies, set to On to use
approximately 50% less toner
for a lighter printout