Epson LX-300 规格指南
5. Turn the ribbon-tightening knob in the direction of the
arrow to remove any slack in the ribbon.
6. Insert the ribbon cartridge into the printer as shown; then
press both sides of the cartridge firmly to fit the plastic
hooks into the printer slots.
hooks into the printer slots.
7. Turn the ribbon-tightening knob to help feed the ribbon
into place; it should not be twisted or creased.
8. Replace the printer cover.
After you install the color ribbon cartridge, run the self test.
If the top or bottom edge of the characters in the self test is a
different color from the rest, adjust the ribbon angle. Check
the characters printed in red. If the top edge is blue, move the
color ribbon adjustment lever forward. If the bottom edge is
yellow, move the lever backward. Then print another self test
to check your adjustment. Repeat this process until the
ribbon is properly adjusted.
different color from the rest, adjust the ribbon angle. Check
the characters printed in red. If the top edge is blue, move the
color ribbon adjustment lever forward. If the bottom edge is
yellow, move the lever backward. Then print another self test
to check your adjustment. Repeat this process until the
ribbon is properly adjusted.
Note:
When you print using the color ribbon, the print speed is reduced.
When you print using the color ribbon, the print speed is reduced.
,QIRUPDWLRQý5HIHUHQFHý/LVW
Engineering Change Notices
None
Product Support Bulletins
None
Technical Information Bulletins
None
Related Documentation
TM-LX300 EPSON
LX-300
Service
Manual
PL-LX300
EPSON LX-300 Parts Price List
4002661
EPSON LX-300 User’s Guide
(3621ý/;ðêíí
(3621ý/;ðêííðìë
éîëëîäé
,QNý-HWý3ULQWHUV