Cisco 3560x-24p 参考指南
B-47
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
debug platform forw-tcam
debug platform forw-tcam
Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
hardware memory manager. Use the no form of this command to disable debugging.
hardware memory manager. Use the no form of this command to disable debugging.
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
Note
This command is not supported on switches running the LAN base feature set.
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If you do not specify a keyword, all forwarding hardware manager debug messages appear.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
adjustment
(Optional) Display hardware manager adjustment debug messages.
allocate
(Optional) Display hardware manager allocation debug messages.
audit
(Optional) Display hardware manager audit messages.
error
(Optional) Display hardware manager error messages.
move
(Optional) Display hardware manager move messages.
read
(Optional) Display hardware manager read messages.
write
(Optional) Display hardware manager write messages.
Release
Modification
12.2(53)SE2
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.