KitchenAid 30-Inch 4-Element Induction Slide-In Convection Range with Baking Drawer 安装指南

Be sure that the electrical connection and wire size are adequate 
and in conformance with the CSA Standard C22.1, Canadian 
Electrical Code, Part 1 - latest edition, and all local codes and 
ordinances.

A copy of the above code standards can be obtained from:

Canadian Standards Association

178 Rexdale Blvd.

Toronto, ON M9W 1R3 CANADA

■

Check with a qualified electrical installer if you are not sure 
the range is properly grounded.

*The NEC calculated load is less than the total connected load 

listed on the model/serial/rating plate.

■

When a 4-wire, single phase 250 volt, 60 Hz., AC only 
electrical supply is available, a 40-amp minimum circuit 
protection is required on 30" (76.2 cm) ranges, fused on both 
sides of the line.

■

A time-delay fuse or circuit breaker is recommended.

■

This range is equipped with a UL or CSA International 
Certified Power Cord intended to be plugged into a standard 
14-50R wall receptacle. Be sure the wall receptacle is within 
reach of range’s final location.

■

Do not use an extension cord.

■

The wiring diagram is located on the back of the range or in a 
clear plastic bag.

8.8 - 16.5 kW

16.6 - 22.5 kW

7.8 - 12.5 kW

12.6 - 18.5 kW

40 or 50

50

194°F (90°C)

194°F (90°C)