KitchenAid 30" Combination Wall Oven with Even-Heat™ True Convection (Lower Oven) 安装指导
2
BUILT-IN OVEN SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■
Phillips screwdriver
■
Measuring tape
■
Drill (for wall cabinet installations)
■
¹⁄₈" (3 mm) drill bit (for wall cabinet installations)
■
Level
■
Flat-blade screwdriver
Parts Needed
■
(4) #8-14 x 1" screws
■
(2) #8-18 x
³⁄₈" screws - bottom vent included with built-in
oven
■
Bottom vent included with built-in oven
Parts Supplied
■
Deflector bracket
■
(2) Plastic spacers
■
#8-18 x
¹⁄₄" screws - (2) for 27" (68.6 cm) models); (4) for
30" (76.2 cm) models - deflector bracket
■
(4) #8-18 x
³⁄₈" screws - oven feet
■
(2) feet
■
(2) front feet
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
NOTE: Refer to the following “Location Requirements” and the
“Location Requirements” section of the Installation Instructions
provided with your built-in oven.
NOTE: Refer to the following “Location Requirements” and the
“Location Requirements” section of the Installation Instructions
provided with your built-in oven.
■
Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance for the oven.
Given dimensions provide minimum clearance for the oven.
■
The recessed installation area must provide complete
enclosure around the recessed portion of the oven.
enclosure around the recessed portion of the oven.
■
The oven support surface must be solid, level and flush with
the bottom of the cabinet cutout.
the bottom of the cabinet cutout.
■
The floor must be able to support a total weight (microwave
and built-in oven) of 208 lbs (95 kg) for 27" (68.6 cm) models
or 249 lbs (113 kg) for 30" (76.2 cm) models.
and built-in oven) of 208 lbs (95 kg) for 27" (68.6 cm) models
or 249 lbs (113 kg) for 30" (76.2 cm) models.
IMPORTANT: To avoid damage to your cabinets, check with
your builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate or sustain other
damage. This oven has been designed in accordance with the
requirements of UL and CSA International and complies with
the maximum allowable wood cabinet temperatures of 194°F
(90°C).
your builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate or sustain other
damage. This oven has been designed in accordance with the
requirements of UL and CSA International and complies with
the maximum allowable wood cabinet temperatures of 194°F
(90°C).
Deflector Bracket Dimensions
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
27" (68.6 cm) Models
A. 26
¹⁵⁄₁₆
" (68.4 cm) overall width
30" (76.2 cm) Models
A. 29
¹⁵⁄₁₆
" (76.0 cm) overall width
A