Canon DP-V2410 手册

OSD Menu

Item

Setting Options (underline indicates factory default)

Internal Sync

Synchronizes four inputs for "4K Input".
On: Force synchronization.
Off: Do not force synchronization.

Channel Name

Sets the name of the selected channel. You can input up to 16 alphanumeric characters.

Picture Mode

Sets the "Picture Mode".

Color Range

Sets the quantization range for SDI and HDMI respectively.
Automatic: Sets the range based on signal information automatically.
Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235): Limits the black and white range.

Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)

Limited 2 (16-255): Limits the black range.

Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)

Note

• Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is

selected for "Color Gamut".

• Operations when "Automatic" is selected are described below.

When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending
on HDMI signal information.

When "DCI-P3" is selected for "Picture Mode", or "DCI-P3", "Cinema Gamut to DCI" or
"DCI-P3+ to DCI" is selected for "Color Gamut", "Full (0-255)" is set.

When "Canon Log" or "Canon Log 2" is selected for "Gamma", "Limited 2 (16-255)" is set.

"Limited 1 (16-235)" is set in the other cases.

The factory default settings for each channel is shown in the following table.

CH1

CH2

CH3

CH4 to CH30

Input Configuration

3G/HD-SDI

HDMI

3G-SDI RAW

–

Select Input Signal

Automatic

Format

Automatic

Internal Sync

Off

Channel Name

(Blank)

Picture Mode

ITU-R BT.709

Canon Log

ITU-R BT.709

Color Range

Automatic

– : not set