Canon DP-V2410 手册
62
OSD Menu
Item
Setting Options (underline indicates factory default)
Display
Function/Display
Function (CDL)
Function/Display
Function (CDL)
Function Settings
Peaking (Peaking 1, Peaking 2, Off)
Peaking 1 (Peaking 1, Off)
Peaking 2 (Peaking 2, Off)
False Color (On, Off)
Capture
Wave Form Monitor (On, Off)
WFM Select Signal (On (Y, Cb, Cr, R, G, B), Off)
Vector Scope (On, Off)
Monochrome/Blue Only/Red Off/Green Off/Blue Off (On, Off)
Backlight Scan (High, Low, Off)
Camera Information (Automatic, On, Off)
Peaking 1 (Peaking 1, Off)
Peaking 2 (Peaking 2, Off)
False Color (On, Off)
Capture
Wave Form Monitor (On, Off)
WFM Select Signal (On (Y, Cb, Cr, R, G, B), Off)
Vector Scope (On, Off)
Monochrome/Blue Only/Red Off/Green Off/Blue Off (On, Off)
Backlight Scan (High, Low, Off)
Camera Information (Automatic, On, Off)
System Settings
Fan Stop (On, Off)
Note
• When changing channels with "Channel UP/DOWN", the channels with "Input Configuration"
(
43) set to "–" are skipped.
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed,
those changes will be applied to "Enable" under the currently selected "Marker Preset".
those changes will be applied to "Enable" under the currently selected "Marker Preset".
Display Channel
Sets the channel to assign to the CH button on the display.
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
Display Name
Sets the name of the main unit. You can input up to 16 alphanumeric characters.
Date/Time
Sets the year/month/date/hour/minute.
Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. The greater the number is, the greater
the brightness.
Off, 1 to 5 (3)
Off, 1 to 5 (3)
Display Button LED
Sets the F buttons and the lamp on the face.
On, Off
On, Off
Compatible Settings
Sets the connection compatibility with HDMI equipment.
Normal: All formats are supported.
Compatible: Set this option when video is not played correctly in "Normal". "4K50.00P/60.00P" is
Normal: All formats are supported.
Compatible: Set this option when video is not played correctly in "Normal". "4K50.00P/60.00P" is
not supported when this option is selected.
Firmware Update
This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
information.