Canon DP-V3010 手册
65
OSD Menu
Item
Setting Options (underline indicates factory default)
Test Pattern
Sets the test pattern built into the main unit.
White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off
White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off
Note
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
• The test pattern will be erased in the following cases:
-
When calibration has been started
-
When the channel is changed using the CH button, F button assigned for Channel UP/
Channel DOWN, or "Select Channel" under "Channel Settings"
Channel DOWN, or "Select Channel" under "Channel Settings"
-
When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
-
When "Reset All Settings" is executed
Various Function
Displays the function list to execute functions.
Monochrome (On, Off), Blue Only (On, Off), Red Off (On, Off), Green Off (On, Off),
Blue Off (On, Off), H Delay (On, Off), V Delay (On, Off), Banner (On, Off)*
Monochrome (On, Off), Blue Only (On, Off), Red Off (On, Off), Green Off (On, Off),
Blue Off (On, Off), H Delay (On, Off), V Delay (On, Off), Banner (On, Off)*
1
,
Function Guide (On, Off)*
2
, OSD Position (Mode 1 (4096x2560), Mode 2 (3840x2160))*
3
,
OSD Size (Large, Small)*
4
, Black Level Control (On, Off)*
5
, Backlight Scan (High, Low, Off)
*
1
Banner
When "Banner" is set to "Off", the banner is displayed only when you press the SET button while
OSD menu is closed.
When "Banner" is set to "Off", the banner is displayed only when you press the SET button while
OSD menu is closed.
*
2
Function Guide
On: You can display the list of functions assigned to an F button on the video display by pressing
On: You can display the list of functions assigned to an F button on the video display by pressing
the SET button while OSD menu is closed.
Off: Function guide is not displayed.
*
3
OSD Position
Mode 1 (4096x2560): OSD is displayed in a 4096x2560 area.
Mode 2 (3840x2160): OSD is displayed in a 3840x2160 area.
Mode 1 (4096x2560): OSD is displayed in a 4096x2560 area.
Mode 2 (3840x2160): OSD is displayed in a 3840x2160 area.
*
4
OSD Size: The size of the OSD menu can be selected from "Large" and "Small".
*
5
Black Level Control: Adjust the black level of dark portions of the image when "Backlight
Control" is set to "Local Dimming".
Control" is set to "Local Dimming".
Note
• "H Delay" and "V Delay" can be used only for SDI signals. Setting is enabled only when
"Peaking 1" or "Peaking 2" is selected and "False Color" is "Off".
• When "H Delay" is "ON", the image display position can be adjusted using the display
controller’s for video in 1280x720 / 24.00P, 25.00P, 30.00P format. Adjust with the menu
screen closed.
screen closed.
• When checking the blanking area using "H Delay"/"V Delay", an audio signal check can be
performed, however some data is not displayed.
• When "CDL/User LUT" is set to "User LUT", "Blue Only" cannot be selected.