Canon DP-V3010 手册

92

Error Messages

Message

Description and Action

Hardware error

Backlight error.

Turn off the main power once and then back on.
If the message persists, contact Canon Customer
Center.

Fan error.

Panel error.

I/F error.

System error.

Input signal

No Signal

Displayed when there is no video signal input.

Unsupported

Unsupported video signal is input. Check the
supported signal format (

"Input Configuration" is different from Payload.

Check the "Input Configuration" (

51) and "Signal

Information" (

70) settings. Reset any incorrect

"Input Configuration" settings.

Operation

Invalid operation.

Operation is disabled. Check the setting items.

"Protect Settings" is on.

To use the OSD menu, move the selection frame to
"Protect" and press the SET button for approximately
3 seconds.

"CDL/User LUT Bypass" is on.

When "CDL/User LUT Bypass" is turned "On", you
cannot adjust the "Power", "Saturation", "Offset", or
"Slope".

Invalid Password.

Enter the correct password.

"Knob Lock" is on.

If the knobs are not functioning, please set "Knob
Lock" to "Off".

USB memory

USB memory is not connected.

Correctly connect the USB memory to the USB port
of this main unit.

Unsupported USB memory.

Check the USB memory format and make sure it is
not protected.