Canon DP-V3010 手册

94

Troubleshooting

Symptom

Cause and Action

"Aspect Marker", "Safety Zone Marker" or
"Area Marker" does not appear.

•  A channel with no signal, unsupported signal, or with "Input

Configuration" not set may be selected. Check the signal.

•  "H Delay" or "V Delay" is turned "On". Set to "Off".
•  Not displayed when "Peaking 1" or "Peaking 2" is selected. Set it to

"Off".

61, 65,

You  forgot  the  password  for  "Protect
Settings".

•  Press the F1 button and the   button on the main unit while the video

display is in standby. The configuration will be reset to the state where
no password is set.

The video display does not start up in the
condition that the power was turned off
last time.

•  Check the "Power on Setting" on the OSD menu. Set "Last memory"

to start up the video display in the condition that the power is turned off
last time.

The image quality for the User mode in
"Picture  Mode"  differs  from  the  image
quality of presets.

•  Select the preset mode by "Copy Picture Mode" and copy the settings.