Canon imagePROGRAF iPF830 MFP M40 手册

 

The Installation Complete screen appears.
Click the Finish button.

 

This completes the installation of Media Configuration
Tool.

Important

After the installation is finished, update the media information by referring to 

If you are running the Media Configuration Tool for the first time after installing it, you need to configure the media
information in the printer control panel and printer driver.

Important

You do not need to perform this procedure if you installed the printer driver using the User Software CD-ROM.

Do not attempt to print or turn the printer off while the program is communicating with the printer.

From the start menu, select All Programs > imagePROGRAF Media Configuration Tool > imagePROG-
RAF Media Configuration Tool.

 

The Select Printer dialog box is displayed. Select
the printer for which to configure the media informa-
tion, and then click the Next button.

Note

If you are using the printer without installing the printer driver, click the Specify a printer that is not in-
stalled button and specify the printer by following the on-screen instructions.

In the following screens, you cannot change the printer where media type information is to be updated.

 

The Add Media Type dialog box is displayed. Make
sure that Connect to the Internet to get the latest
information is selected, and then click the OK but-
ton.
The latest media information file is downloaded from
the Internet.

 

 

 

iPF830

                                                                                                                                                            

Updating Media Information After Installation

                                                                                                                                                                                                                      

Handling and Use of Paper

Media Configuration Tool (Windows)

377