Canon PowerShot SX620 HS Black 手册
210
ç
Contents
Configuring the Computer for a Wi-Fi Connection
(Windows Only)
On a computer running Windows, configure the following settings
before connecting the camera to the computer wirelessly.
1
Confirm that the computer is
connected to an access point.
●
For instructions on checking your
network connection, refer to the
computer user manual.
2
Configure the setting.
●
Click in the following order: [Start]
menu ► [All Programs] ► [Canon
Utilities] ► [CameraWindow] ►
[Wi-Fi connection setup].
●
In the application that opens,
follow the on-screen instructions
and configure the setting.
●
The following Windows settings are configured when you run the
utility in step 2.
-
Turn on media streaming.
This will enable the camera to see (find) the computer to access
via Wi-Fi.
-
Turn on network discovery.
This will enable the computer to see (find) the camera.
-
Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
-
Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
●
Some security software may prevent you from completing the settings
as described here. Check the settings of your security software.