Canon PowerShot SX620 HS Black 手册

ç

 Contents

Connect to your access point via Wi-Fi as follows.

Also refer to the access point user manual.

Confirm that the Wi-Fi router or base station conforms to the Wi-Fi 

Connection methods vary depending on whether the access point 

supports Wi-Fi Protected Setup (WPS, = 212) or not (= 217). 

For non-WPS access points, check the following information.

 

●

Network name (SSID/ESSID) 

The SSID or ESSID for the access point you use. Also called 

the “access point name” or “network name”.

 

●

Network authentication / data encryption (encryption method / 

encryption mode) 

The method for encrypting data during wireless transmission. 

Check which security setting is used: WPA2-PSK (AES), 

WPA2-PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP 

(open system authentication), or no security.

 

●

Password (encryption key / network key) 

The key used when encrypting data during wireless 

transmission. Also called the “encryption key” or “network key”.

 

●

Key index (transmit key) 

The key set when WEP is used for network authentication / 

data encryption. Use “1” as the setting.

 

●

If system administrator status is needed to adjust network 

settings, contact the system administrator for details.

 

●

These settings are very important for network security. Exercise 

adequate caution when changing these settings.