Canon imagePROGRAF iPF6400 手册
Caution
•
Do not release the flanges until you load the holder fully in the Roll Holder Slot. Rolls are heavy, and dropping a roll
may cause injury.
may cause injury.
•
Be careful not to pinch your fingers between the guide grooves (b) and the Roll Holder shaft (c) when loading rolls.
Important
•
Do not force the Roll Holder into the printer with the right and left ends reversed. Otherwise, it may damage the
printer or Roll Holder.
printer or Roll Holder.
Note
•
If it is difficult to load rolls from the front of the printer, load rolls from the back of the printer.
5
Insert the edge of the roll in the Paper Feed Slot (a) and
advance the roll until you hear the feed tone.
advance the roll until you hear the feed tone.
Important
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality.
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
•
If the paper is wrinkled or warped, straighten it out before loading it.
•
Load paper straight so it is not fed askew.
Note
•
Regardless of whether the leading edge of the roll paper is inserted into the Paper Feed Slot, if "No paper loaded."
is displayed, pull the roll paper out from the Paper Feed Slot once and then repeat step 5.
is displayed, pull the roll paper out from the Paper Feed Slot once and then repeat step 5.
6
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the
barcode printed on rolls.
barcode printed on rolls.
ManageRemainRoll
Barcodes
Printer Operation After the Paper is Fed
Off
Printed
A menu for selection of the type of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not printed
On
Printed
The type and amount of paper left is automatically detected based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
There is no need to specify the type and length of the paper.
Not printed A menu for selection of the type and length of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Note
•
For details on types of paper to select, see the Paper Reference Guide.
iPF6400
Loading Rolls in the Printer
Handling and Use of Paper
Handling rolls
535