Canon imagePROGRAF iPF6400 手册

下载
页码 966
4
Press  or  to select the type of paper loaded (Roll Paper or Manual Paper), and then press the OK button.
5
Press  or  to select the type of paper loaded in the printer, and then press the OK button.
Important
Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause feed errors
and affect printing quality.
Note
For details on types of paper, see the Paper Reference Guide. 
 By default, Plain
Paper is selected.
Using the Same Type of Paper Regularly
Configure this setting so that current media type settings will be automatically selected when you load the same type of
paper later.
1
 
On the Tab Selection screen of the Control Panel, press 
◀ or ▶ to se-
lect the Paper tab (
).
Note
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press  or  to select Keep Paper Type, and then press the OK button.
4
Press  or  to select On, and then press the OK button.
Note
The specified media type setting is updated in the following situations.
When using sheets, if you send a print job before loading a sheet, the media type setting is updated to match the type of
paper specified by the print job.
When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed on the roll, the media
type setting is updated to match the type of paper specified by the barcode.
To change the media type setting, 
Specifying the Paper Length
Specifying the Paper Length
When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
Specify the paper length when you have set ManageRemainRoll to On
 
iPF6400
                                                                                                                                                                                              
Specifying the Paper Length
 
 
Handling and Use of Paper
Handling rolls
537