Canon TX-20 Full Auto Tonometer 手册
3NamesofParts
27
PATIENT ID Screen
This screen is used to input patient IDs.
9
10
8
7
6
1
2
2
4
5
3
1
Patient ID area
The text selected from the list of characters
appears in the patient ID input field.
appears in the patient ID input field.
A maximum of 64 ASCII code characters can be
input.
input.
2
ID cursor
Shows the position where the patient ID can be
edited.
edited.
3
List of characters
List of characters that can be input for a patient ID.
4
Selection cursor
Select characters to input for a patient ID.
5
ID cursor movement commands
The ID cursor moves in the direction of the selected
arrow.
arrow.
6
ID delete command
[BS]: Deletes the character that is before the
character specified by the ID cursor. However, if
the ID cursor is specifying the first character, it
deletes that character.
character specified by the ID cursor. However, if
the ID cursor is specifying the first character, it
deletes that character.
[CLS]: Deletes all the characters in the patient ID.
The confirmation screen is displayed; select one of
the following.
The confirmation screen is displayed; select one of
the following.
• [OK]: Deletes all text.
• [CANCEL]: Does not delete.
7
Operation reference guide
Shows the types of buttons that can be operated
in the PATIENTID screen. Refer to "5 Types of
Measurements" for operating procedures.
in the PATIENTID screen. Refer to "5 Types of
Measurements" for operating procedures.
8
MEASURE key*
Press to switch to the Measurement screen.
9
MENU key*
Press to switch to the MENU screen.
10 DATA key*
Press to switch to the DATA screen.
* By doing the settings in advance, if a patient ID has not been input when it is pressed, a message
indicating that the patient ID has not been input is displayed (see page 68).
L-IE-5191C_TX-20.indb 27
2013/07/18 13:10:20