Canon DIGISUPER 76 手册

E4

1  HOW TO MOUNT

E5

Switch Box Cable

“SW. BOX” Connector

Lens

Switch Box

Pan Handle

Clamp

Clamp fixing knob

The AF demand unit is mounted and connected as shown 
in the figure below. Follow the procedure in the operation 
manual for the demand to mount and connect the demand.

AF Demand

FDJ-P41

Demand Cable

Lens

Fixing 

Ring

•  This figure shows the 

case with the AF demand 

FDJ-P41 mounted on the 

right side as viewed from 

the camera.

Lock

  Plug the connector of the IS operation unit into the 

receptacle labeled “AUX” on the left side of the lens 
(as viewed from the camera).

  The IS Indicator unit on the other branch of the cable 

comes with an anchoring screw. Mount it to the 
location (such as on the edge of the viewfinder) where 
the ON/OFF status of the LEDs can be observed. 
The IS indicator unit is not necessary for the camera 
equipped with display function.

Lens

IS Operation Switch

Fixing Belts

IS Indicator Unit 

(or Viewfinder)

“AUX (IS Controller)”

 Connector

When using a camera provided with a function for receiving 
the signals indicating that the IS function is operating or 
stopped from the lens side and displaying this operating 
status on its viewfinder, it is possible to connect only the IS 
Operation Switch and operate it to perform these functions.
Remove the IS indicator unit that is connected partway 
along the cable from the IS operation unit.