Canon ME200S-SH 手册
Gain
36
Gain
When the camera mode is set to [Manual], you can manually adjust the gain to change the brightness
of the image. When the camera mode is set to [Auto], the camera will automatically adjust the gain. In
such case, you can set an automatic gain control (AGC) limit to prevent the camera from using gain
values above the preset limit.
of the image. When the camera mode is set to [Auto], the camera will automatically adjust the gain. In
such case, you can set an automatic gain control (AGC) limit to prevent the camera from using gain
values above the preset limit.
Manual Adjustment
1 Set the camera mode to [Manual] (A 31).
2 Press SET.
• One of the adjustable settings will be highlighted in orange on the screen.
3 Push the joystick left/right to select the current gain value.
4 Push the joystick up/down to select the desired value and then press SET.
• You can select a value from 0.0 to 56.0 dB (in 3.0-dB increments between 0.0 and 54.0 dB) while
checking the effect on the image.
NOTES
• When high gain levels are set, the picture may flicker slightly.
• When high gain levels are set, bright red, green or blue dots may appear on the screen. In such
• When high gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 37) or select a lower gain value.
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the gain
value with the remote controller's ISO/GAIN Í/Î buttons.
Auto Gain Control (AGC) Limit
1 Set the camera mode to [Auto] (A 31).
2 Open the [AGC Limit] submenu.
[Camera Setup] > [AGC Limit]
3 Select the desired level and then press SET.
• You can select [Off (56dB)] (no limit, maximum gain 56 dB)
or a maximum gain level from 30 dB to 54 dB (in 3-dB
increments).
increments).
[Camera Setup]
[AGC Limit]
[Off (56dB)]