Canon ME200S-SH 手册

Adjusting the Focus

The camera offers the following ways to focus and incorporates Dual Pixel CMOS AF technology for
advanced autofocus performance. See also the general notes at the end of this section (A 46).

Manual focus: Turn the focus ring on the lens to adjust the focus.

One-shot AF*: With the lens’s focus mode switch set to AF, you will be able to focus manually but still
have the option to press an assignable button set to [One-Shot AF] to let the camera focus automatically
once.

Continuous AF*: The camera continuously focuses on the subject at the center of the screen.

* Not available when a manual focus lens or a CN20x50 IAS H/E1 lens is attached to the camera.

Focusing methods and required settings

** In parentheses is the corresponding position of the focus operation change-over knob on a CINE-SERVO lens.

Manual Focus

Focus manually using the focus ring on the lens.

1 Set the focus mode switch on the lens to MF.

• On a compatible CINE-SERVO lens (A 71), set the focus

operation change-over knob to MANU. and set the
camera's AF mode to [One Shot] (step 3 in the following
procedure, A 43).

2 Turn the lens's focus ring to adjust the focus.

NOTES

• With some EF lenses, you may be able to operate the focus

ring even when the focus mode switch is set to AF.

• When using the optional RC-V100 Remote Controller to adjust

the focus, set the focus mode switch to AF (or the focus
operation change-over knob to SERVO).

Focusing method

Focus mode switch

on an EF lens**

[Camera Setup]

[AF Mode] setting

Manual focus

Focus ring

(MANU.)

—

FOCUS dial on an optional RC-V100 Remote
Controller connected to the camera

(SERVO)

[One Shot]

One-shot AF

Assignable button set to [One-Shot AF]

(SERVO)

[One Shot]

Continuous AF

(SERVO)

[Continuous

(Always On)],

[Continuous

(Auto Off)]