Canon DIGISUPER 27AF 手册
E4
E5
1 HOW TO MOUNT
Connecting Wiper Switch Box
(Option)
When using separately purchased switch box for the
wiper equipped lens, connect it to the lens using the
dedicated cable. (Connection method varies by switch box
specifications.)
wiper equipped lens, connect it to the lens using the
dedicated cable. (Connection method varies by switch box
specifications.)
Lens
“SW. BOX” Connector
Wiper Switch Box
Cable
Wiper Switch Box
(Shapes and connections
vary by specifications.)
Connecting the “VIRTUAL” Cable
(Only Models with "VIRTUAL"
Connector)
The lens is equipped with the connector labeled “VIRTUAL”
on its left side (as viewed from the camera). This connector
can be used for connection with an interface to virtual
systems. Zoom, focus and iris signals can be output in three
types of communication data; analog signal, encoder pulse
train and RS-422.
on its left side (as viewed from the camera). This connector
can be used for connection with an interface to virtual
systems. Zoom, focus and iris signals can be output in three
types of communication data; analog signal, encoder pulse
train and RS-422.
* (NOTE)
Connector location may vary by models.
“VIRTUAL”
Connector
To Virtual System
1-3 Mounting the
Accessories for Semi-
servo Operation
The zoom servo demand and the flexible focus control unit
are mounted and connected as shown in the figure below.
When mounting the various demands, refer to the operation
manual for the respective demand.
are mounted and connected as shown in the figure below.
When mounting the various demands, refer to the operation
manual for the respective demand.
① Flexible module
② Flexible focus control unit
③ Servo module
④ Zoom servo demand
⑤ Flexible cable
⑥ Demand cable