Canon DIGISUPER 22 xs 手册
E4-39
4. Menu screen – Iris
Iris – Setting the remote iris gain
(2) Setting the remote iris gain
The remote iris gain has already been set to level “90” at the factory but it can be changed if so desired.
The same remote iris gain setting is used for all the users regardless of the user who is indicated on the display. For
this reason, there is no need to select the user before performing the setting. As an exception to the general rule, any
change made in the setting is reflected for user 0 as well.
this reason, there is no need to select the user before performing the setting. As an exception to the general rule, any
change made in the setting is reflected for user 0 as well.
A 1
A 2
V
[
] 1
VTR
FRM1
RET
R
EXT
I G : 5 0
Menu
[ IND ]
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[
]
[ I-Gain ]
Iris
Remote:
95
Auto:
52
[
]
Iris
[
]
[ I-Gain ]
Comp:
Comp:
ON
Close:
OFF
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[
]
Iris
[
]
[ I-Gain ]
Comp:
Comp:
ON
Close:
OFF
Menu
Set
Set
Set
01
99
to
x3
x2
or
Iris
[
]
※
(NOTE): When adjusting the
gain while checking
the iris operation
the iris operation
→
Set the camera’s iris
mode to [Remote].
※
(NOTE): The iris gain setting
is not initialized
even when the
steps described in
“Initializing” on page
E4-6 are taken.
even when the
steps described in
“Initializing” on page
E4-6 are taken.
1. Push the
key, push the
Set
key and
push the
key three times.
The display is switched to the Iris screen.
2. Push the
key, and push the
Set
key.
The display is switched to the [I-Gain] screen.
3. Push the
key twice.
An underline appears below [Remote].
The function set last or default value is highlighted.
4. Push the
key or
key.
Push the left or right key until the value to be
changed to appears.
5. Push the
Set
key.
Top initial screen
Iris screen
[I-Gain] screen
Selection item
Function
Minimum gain
Maximum gain
Default value: 90