Canon DIGISUPER 22 xs 手册
E4-41
4. Menu screen – Iris
OFF
ON
Menu
Set
(D)
x3
x3
or
Iris
[
]
Iris – Setting the iris close detection to ON or OFF
Setting the iris close detection to ON or OFF
This iris cannot be closed when the extender (2.0x) is inserted while the iris correction function is set to ON. To com-
pensate for this, a function which closes the iris when iris close has been detected can be set.
pensate for this, a function which closes the iris when iris close has been detected can be set.
※
(NOTE): Depending on the
camera, it may not be
possible for the iris
to operate properly
due to the interaction
between the iris
correction function of
the lens and the iris
control exercised from
the camera. At such a
time, set the iris close
detection to OFF.
possible for the iris
to operate properly
due to the interaction
between the iris
correction function of
the lens and the iris
control exercised from
the camera. At such a
time, set the iris close
detection to OFF.
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
＊
: This appears when
ON is selected as the
{Comp} setting.
No iris close detection
VTR
A 1
FRM1
A 2
V
RET
R
[
] 1
＊
＊
EXT
I G : 5 0
Menu
[ IND ]
Iris
[
]
[ I-Gain ]
Iris
[
]
Comp:
ON
Close:
OFF
Iris
[
]
Comp:
Close:
Close:
ON
ON
Comp:
[ I-Gain ]
[ I-Gain ]
ON
Close:
OFF
※
(NOTE): Iris close detection takes effect when the iris correction function is set to ON.
1. Push the
key, push the
Set
key and push the
key three times.
The display is switched to the Iris screen.
2. Push the
key three times.
An underline appears below [Close].
The function set last or default function is highlighted.
3. Push the
key or
key.
Push the left or right key to select {ON} or {OFF}.
Top initial screen
Iris screen
Iris close detection
Selection item
Function
(D): Default value