Canon CXDI-501G Digital Radiography System 产品宣传册

The Canon CXDI-501 Series 

Digital Radiography (DR) Detectors  

offer leading DR technology in a thin, 

lightweight and portable flat panel detector.  

Designed to fit in most existing Bucky trays, the 

CXDI-501 Series DR Detectors, with enhanced 

cable routing system, detachable cable, easy-

to-grip handle and 331 lbs (150 kg)

**

 of overall 

standing pressure, provide the flexibility,  

versatility and easy adjustment to aid in the 

positioning and everyday workflow of your 

system.  Help improve performance and  

experience added portability with a Canon 

CXDI-501 Series DR Detector today.

CANON MEDICAL SYSTEMS

A Division of Canon U.S.A., Inc.

15955 Alton Parkway

Irvine, CA 92618-3731, U.S.A.

Telephone: (U.S.A. only): 800-970-7227, 949-753-4160

Fax: 949-753-4164

Email: drsales@cusa.canon.com

Website: www.usa.canon.com/dr

DRB-018 Rev. A

* Compared to all other Digital Radiography Detectors, except CXDI DR Detectors, as of November 20, 2011. 

CANON, CXDI and LANMIT are registered trademarks of Canon Inc. in the United States and may also be 

registered trademarks or trademarks of other countries. DICOM is a registered trademark of the National 

Electrical Manufacturer’s Association for its standards publications relating to digital communications of 

medical information. All other referenced marks are trademarks of their respective owners and are hereby 

acknowledged.  All rights reserved.

© 2011 Canon U.S.A., Inc

INCHES

POUNDS

MICRONS

SECONDS

Scintillator 

 

 

                    

 

 

 

       

   

 

Purpose  

 

 

General Radiography

Method  

 

 

Flat Panel Detector, Scintillator & Amorphous Silicon (a-Si)

Sensor    

 

 

LANMIT (Large Area New-MIS Sensor and TFT)

Pixels   

 

 

2,800 x 3,408 Pixels (9.5 Megapixels)

A/D 

 

 

 

14-bit

Grayscale 

 

 

4,096 grayscale (12-bit)

High Resolution Image   

Approx. 5 seconds after X-ray Exposure 

Display Time 

 

 

DICOM   

 

 

DICOM 3.0 Compatible, Print Management Service Class (SCU), Storage 

 

 

 

 

Service Class (SCU), and Others

Grid Density Required 

 

52 lp/cm

Cycle Time 

 

 

Approx. 9 sec.

Operating Environment   

Sensor Unit: 41 - 95°F (5 - 35°C), 30-80% RH (non-condensing)

Dimensions 

              

18.1 x 16.7 x 0.6 in (460 x 424 x 15 mm) 

Sensor Cable Length 

 

21 ft, 4.5 ft + 16.5 ft (7 m, 1.5 + 5.5 m)  

 

Standard Components   

Sensor Unit, Power Box, Remote Switch, X-ray Interface Cable