Olympus PT-032 说明手册
E-18
Seal the Case.
Make sure the camera is loaded properly.
: • Seal the Case by turning both buckle lock levers down
in arrow direction. When one of the buckles is left
open, the Case will not be sealed and water leakage
will be caused.
open, the Case will not be sealed and water leakage
will be caused.
CAUTION
Set the mode dial on the rear lid of the Case to “SCENE”, close the
front lid gently (so that the O-ring does not slip out of the groove),
hook the buckle on the edge of the rear lid, and tilt the buckle
open/close lever in the direction of the arrow to seal the Case
hermetically.
front lid gently (so that the O-ring does not slip out of the groove),
hook the buckle on the edge of the rear lid, and tilt the buckle
open/close lever in the direction of the arrow to seal the Case
hermetically.
Check the following points before sealing the Case.
Is the digital camera loaded properly?
Is the mode dial set to “SCN”?
Is silica gel inserted deep in the specified location?
Is the O-ring attached properly to the opening on the Case?
Is there any dirt or foreign matter on the O-ring or the O-ring contact
surface on the front lid?
PT032_E.qxd 05.12.27 7:33 PM ページE-18