Olympus PT-032 说明手册

E-19

After sealing the Case, check that the camera functions normally.

1. Push the POWER button on the Case and confirm that the camera

turns ON/OFF.

2. Turn the mode switch on the Case and confirm that the camera

mode switches properly.

3. Confirm that the mode displayed on the camera’s LCD monitor

coincides with the position of the mode dial on the rear lid of the
Case.

4. Push the shutter lever on the Case and confirm that the camera

shutter releases.

 Also operate other control buttons on the Case and confirm that

the camera functions properly.

: • If the camera does not function properly, restart the digital

camera installation procedure from “Check the digital
camera.” on page E-14 of this manual.

PT032_E.qxd  05.12.27  7:33 PM  ページE-19