Netgear FVS318v2 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参考手册
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
3-4
Connecting the Firewall to the Internet
M-10146-01
How to Connect the FVS318 VPN Firewall
This section provides instructions for connecting the FVS318 Broadband ProSafe VPN Firewall
to your Local Area Network (LAN).
to your Local Area Network (LAN).
Note:
The Resource CD included with your firewall contains an animated Installation Assistant to
help you through this procedure.
There are three steps to connecting your firewall:
1.
Connect the firewall to your network
2.
Log in to the firewall
3.
Connect to the Internet
Follow the steps below to connect your firewall to your network. You can also refer to the
Resource CD included with your firewall which contains an animated Installation Assistant to help
you through this procedure.
Resource CD included with your firewall which contains an animated Installation Assistant to help
you through this procedure.
1. Connect the Firewall to Your LAN
a.
Turn off your computer and Cable or DSL Modem.
b.
Disconnect the Ethernet cable (A) from your computer which connects to your Cable or
DSL modem.
DSL modem.
Figure 3-1: Disconnect the Cable or DSL Modem
DSL modem
A