Netgear FVS318v2 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参考手册
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
Connecting the Firewall to the Internet
3-5
M-10146-01
c.
Connect the Ethernet cable (A) from your Cable or DSL modem to the FVS318’s Internet
port.
port.
Figure 3-2: Connect the Cable or DSL Modem to the firewall
d.
Connect the Ethernet cable (B) which came with the firewall from a Local port on the
router to your computer.
router to your computer.
Figure 3-3: Connect the computers on your network to the firewall
Note: The FVS318 VPN Firewall incorporates Auto Uplink
TM
technology. Each LAN
Ethernet port will automatically sense whether the cable plugged into the port should have a
'normal' connection (e.g. connecting to a PC) or an 'uplink' connection (e.g. connecting to a
switch or hub). That port will then configure itself to the correct configuration. This feature
also eliminates the need to worry about crossover cables, as Auto Uplink will accommodate
either type of cable to make the right connection.
'normal' connection (e.g. connecting to a PC) or an 'uplink' connection (e.g. connecting to a
switch or hub). That port will then configure itself to the correct configuration. This feature
also eliminates the need to worry about crossover cables, as Auto Uplink will accommodate
either type of cable to make the right connection.
Cable or
DSL modem
A
Cable or
DSL modem
B