Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参考手册
ProSafe VPN Firewall FVS318v3 Reference Manual
Advanced Configuration
7-5
v5.0, January 2012
3. Type the MAC Address of the PC or server.
(Tip: If the PC is already present on your network, you can copy its MAC address from the
Attached Devices menu and paste it here.)
Attached Devices menu and paste it here.)
4. Click Apply to enter the reserved address into the table.
Note: The reserved address will not be assigned until the next time the PC contacts the firewall’s
DHCP server. Reboot the PC or access its IP configuration and force a DHCP release and renew.
DHCP server. Reboot the PC or access its IP configuration and force a DHCP release and renew.
To edit or delete a reserved address entry:
1. Click the button next to the reserved address you want to edit or delete.
2. Click Edit or Delete.
Configuring Static Routes
Static Routes provide additional routing information to your firewall. Under normal
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You must configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You must configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route table shown below.
Static Route table shown below.
Figure 7-2Static Routes table
To add or edit a Static Route:
1. Click the Add button to open the Add/Edit menu, shown below.