Transparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one side only.
For best results, use only recommended Xerox transparencies.

To order paper, transparencies, or other specialty media, contact your local reseller or go to

www.xerox.com/office/7500supplies

Caution:

Damage caused by using unsupported paper, transparencies, or other specialty media is

not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside
these areas; please contact your local representative for details.

See also:

www.xerox.com/paper

Recommended Media List (United States)

www.xerox.com/europaper

Recommended Media List (Europe)

Guidelines

•

Remove all paper before loading transparencies in the tray.

•

Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than 100
transparencies in Tray 2. Overloading the tray may cause the printer to jam.

•

Handle transparencies by the edges using both hands to avoid fingerprints and creases, which can
cause poor print quality.

•

After loading the transparencies in the tray, use the control panel to change the paper type to
Xerox Transparency.