Xerox Phaser 7100 管理员指南

Introduction

Phaser 7100 Color Printer
System Administrator Guide

8

Overview

This guide is designed for a system administrator with network administrator rights who has 
knowledge of networking concepts as well as experience creating and managing network user 
accounts.

This guide will help you install, configure, and manage the printer on a network.

Notes:

•

Network features are not available if you are connected through USB.

•

Embedded fax features are not available for all printer models.

Configuration Steps

When configuring the printer for the first time, Xerox suggests that you follow these steps in this order:
1.

Connect an Ethernet cable from your printer to the network.

2.

Confirm that your printer is recognized on your network. By default, the printer is configured to 
receive an IP address from a DHCP server over a TCP/IP network. If you have another type of 
network, or want to assign a static IP address, see 

3.

Provide basic information such as your location, time zone, and date and time preferences, by 
completing the Installation Wizard.

4.

Print a Configuration Report listing the current configuration of the printer. Review the report and 
locate the IP address of the printer. For details, see 

5.

Open a Web browser and type the IP address of your printer to access CentreWare Internet 
Services. CentreWare Internet Services is administration and configuration software installed on 
the embedded Web server of the printer. For details, see 

Note:

 Most configuration settings can be accessed by selecting the Properties tab in CentreWare 

Internet Services. If your printer is locked, you must log in as the system administrator. For details, 
see 

6.

Configure Authentication. For details, see 

on page 44.

7.

Configure Security. For details, see 

8.

Enable services in CentreWare Internet Services. For details, see 

9.

Configure Print features. For details, see 

10. Configure Accounting. For details, see