Xerox Phaser 8200 产品宣传页

Indicator light problems  

The printer is turned off, not ready, disabled, or has detected an error.

■

Make sure that the printer is plugged in and turned on.

■

Do not plug the printer’s power cord into a power strip; use a grounded wall outlet.

■

If the printer is receiving, processing, or printing a job, wait for the job to be 
completed or cancel the job.

■

If you have entered the menu in the front panel, you can exit the menu.

■

If the warm-up sequence has not finished, wait until the printer displays 

.

■

The printer is still printing but there is a warning condition that needs user attention 
soon.

■

The printer has stopped because it detected an error or condition that required user 
intervention, for example, an open door or a paper jam. Correct the condition reported 
on the front panel (in the example, you would close the door or clear the paper jam).

■

Press the Information key to access more information on the error condition.

■

Refer to the following pages for information about particular error conditions. For 
detailed information about jams, refer to the Phaser 8200 Color Printer User Guide.