Xerox Phaser 8200 产品宣传页

Front panel error messages  

■

The front panel menu times out and returns to 

 if no activity occurs 

in the menu system in 2 minutes.

■

If you want to re-enter the menu system, highlight 

 and press the OK key.

■

Too much media is stacked in the output tray. Remove all printed pages from the 
output tray.

■

One or more ink-loading bin is almost empty. Add more ink soon.

■

If needed, order additional Phaser ColorStix® 8200 Ink Sticks. See the web site:

■

One or more ink-loading bin is empty. Add more ink sticks to the bin that is empty.

■

A label above each bin indicates the color and color number of that bin. Because 
the magenta, cyan, and black ink sticks are all dark, refer to its color number to 
determine which bin to load the ink stick. Don't worry if the yellow ink sticks 
have darker areas.

■

Use only Phaser ColorStix® 8200 Ink Sticks; the use of other ink may affect print 
quality and reliability. Xerox warranties and service contracts do not cover 
damage, malfunction, or degradation of performance caused by the use of 
non-Xerox supplies or consumables or the use of Xerox supplies not specified for 
use with this printer.

■

Each ink stick is uniquely shaped to fit into the correct ink-loading bin. Insert the 
ink stick's narrow end first.

■

One or more ink sticks are stuck in the ink-loading bin. Open and close the top cover.

■

If the problem persists, move the ink sticks until there are no spaces between sticks of 
the same color.

■

To prevent problems:

■

Do not use broken ink sticks.

■

Always install the ink stick's narrow end first.