Xerox Phaser EX7750 安装指南
1
1-8
Installing User Software on a Windows Computer
8.
To receive an e-mail notification after your job has been printed, select Enable E-mail
Notification, and type in the e-mail address to which an e-mail notification is sent.
Notification, and type in the e-mail address to which an e-mail notification is sent.
You will also receive e-mail notification of any errors that occur during printing.
N
OTE
:
Enable E-mail Notification is displayed only if Email Service is enabled at Setup.
N
OTE
:
Make sure to clear the check box for Enable advanced printing features in the
Advanced tab.
9.
Click OK.
Completing the Windows 2000/XP printer connection
To print from Windows 2000/XP, you must:
• Set up network servers, if any.
• Set up the EX7750 to accept print jobs from your computer.
• Configure a port on each Windows 2000/XP computer for the network type.
Completing the Windows 2000/XP TCP/IP and Port 9100 or LPR connection
After you have installed the PostScript and printer driver files, complete the setup
for the TCP/IP and LPR connection as follows:
for the TCP/IP and LPR connection as follows:
• Prepare the EX7750 to accept print jobs using TCP/IP and LPR protocols.
For details, see the
Configuration Guide
.
• Enable LPD or Port 9100 from the EX7750 FACI. For details, see the
Configuration
Guide
.
• Configure the computer for the TCP/IP connection.
To do this
See
Configure the TCP/IP (LPR port)
connection
connection
Configure the IPX (Novell) connection
Configure the IPP connection