Xerox Phaser 6200 产品宣传页
PHASER
®
6200 COLOR PRINTER
Calibrate for Margins
Page 1 of 1
The
Calibrate Margins Menu
allows you to adjust the printer's imaging area relative to the edges of the paper. The
imaging area is shown as a dashed rectangle; the printer will not print outside this rectangle.
Step 1.
Adjust Side 1 Margins. To move the dashed rectangle to the postion you want it on the page:
1.
From the printer's front panel
Support Menu
, scroll to
Improve Print Quality?
and press OK.
2
. Scroll to the
Calibrate Margins Menu
and press OK. Select
Print Calibrate Margins Page
and press OK to print this
page.
3
. To move the dashed rectangle you see on the page printed to the position you want, use the front panel menu
items
Adjust Side 1 "A" Margin
and
Adjust Side 1 "B" Margin
as illustrated below.
4.
Reprint this page to verify the adjustment.
You can adjust the settings from -40 to +40 units. The thickness of the rectangle's dashed lines is 1 unit. 12 units move
the rectangle 1 mm. The maximum distance the rectangle can be moved (-40 to +40) is 6.7 mm.
Decrease
Adjust Side 1 "B"
Margin
setting to move left.
Increase
Adjust Side 1 "A"
Margin
setting to move up.
Increase
Adjust Side 1 "B"
Margin
setting to move right.
Decrease
Adjust Side 1 "A"
Margin
setting to move down.
Step 2.
If the printer has the duplex option, adjust Side 2 Margins.
1.
With Side 1 facing you, hold the print up to a strong light. Note the shadow of the solid lines printed on Side 2.
2.
Use the front panel menu items
Adjust Side 2 "A" Margin
and
Adjust Side 2 "B" Margin
to move the Side 2 solid
lines until they align with the Side 1 rectangle. Reprint to verify your adjustment.
Phaser 6200 Color Printer
Calibrate Margins
Phaser 7700 Color Printer
Calibrate Margins
Phaser 6200 Color Printer
Calibrate Margins
Phaser 6200 Color Printer
Calibrate Margins
B-
B+
A+
A-
Phaser 6200
Cal
Phaser 6200
Cal
A
B
A
B
+
-
+
-