Xerox Phaser 6200 发行公告

Xerox Phaser 6200 Color Laser Printer

Maintenance Firmware Release Installation Instructions

Page 2 of 12



Checking the Version of Firmware Installed in a
Phaser 6200 Printer

Check the version presently installed in your printer before performing the printer
firmware update. The printer displays the firmware version presently installed on
the configuration page. A configuration page is printed from the printer’s front
panel controls.

To print the configuration pages and check the firmware version presently
installed:

Use the arrow keys on the printer’s front panel to select the “Printable Pages”
item, and press “Enter”.

Press the down arrow key to scroll to the “Configuration Pages” key, and press
“Enter”.

The printer prints two pages of configuration information. The firmware version
presently installed is displayed on the seventh line of the left column on the first
page. Check the firmware version presently installed against the table below to
determine if you need to update your printer:

Release Date

Notes

Version Numbers

May, 2002

Original Release - Install
upgrade.

OS 4.26 / PS 2.12 /
Net 14.66.02.22.2002

October, 2002

Maintenance Release - No need
to install upgrade.

OS 4.32 / PS 2.16 /
Net 15.50.08.27.2002

Note:

The print engine firmware revision number is not affected by this
firmware update package. The print engine firmware revision number
is shown after the identifier “Eng” in the printer firmware version
line, between the “PS” and “Net” items.