Xerox Phaser 8400 用户指南

This topic includes:

■

■

■

For safety information, go to 

Reference/Troubleshooting/User Safety

 on the User 

Documentation CD-ROM.

Always wait 30 minutes after shutting down the printer before moving it or preparing it 
for shipment. This allows time for the ink in the printer to solidify.

Follow these guidelines to avoid injuring yourself or damaging the printer:

■

Always allow the printer to cool before it is moved to avoid ink spills which can damage 
the printer.

■

Use the Fast Shutdown mode at the front panel (

) for 

best results.

■

Always turn off the printer using the power switch, located under the interface cover on 
the right side of the printer, and unplug all cables and cords. 

 turn off the printer by 

pulling the power cord or using a power-strip with an on/off switch.

■

Never move the printer if you receive a 

 message 

at the printer’s front panel. This message means the printer is not ready to be moved. If the 
printhead is not locked, the printer can be damaged during shipment.

■

Always look at the green flag in the exit tray to ensure that it is in the raised position. 
When the green flag is raised the printhead is locked. 

■

Always use two people to lift the printer.

■

Always move the printer separately from the 525-Sheet Feeder.

■

Failure to repackage the printer properly for shipment can result in damage to the printer 
not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee.

The Total Satisfaction Guarantee is available in the United States and Canada. 
Coverage may vary outside these areas, please contact your local representative for 
details. (Free Color Printer customers are not eligible for this coverage.)