Xerox Phaser 6200 产品宣传页

下载
页码 33
Fonts
Phaser® 6200 Color Laser Printer
24
Listing the fonts from a PC  
To list the fonts available on the printer, use the font download utility on the Xerox web site at: 
Listing the fonts from your printer’s front panel
You can print both a PCL font list and a PostScript font list from the front panel:
1. 
On the front panel, with 
Menus 
highlighted, press the OK key.
2. 
Scroll to 
Printable Pages Menu
 by pressing the Up Arrow or Down Arrow key and press 
the OK key.
3. 
Scroll to either 
Print PostScript Font List 
or to
 Print PCL Font List
 and 
press the OK key.
Listing the fonts from CentreWare IS
You can print font samples from CentreWare IS if you have a hard drive on your printer.
1. 
Enter the printer’s IP address in your browser to open CentreWare IS.
2. 
Click the Print tab.
3. 
Click Print Fonts to display the Print Font Samples screen.
4. 
Select either PostScript or PCL fonts. You can only select one at a time.
5. 
Click the button to start to print.
Downloading fonts
    
To supplement the resident fonts (which are always available for printing), downloadable fonts can be 
sent from your computer and be stored in the printer’s memory or on the printer’s optional hard drive. 
Adding more printer memory expands the number of fonts that can be stored in your printer’s memory 
at once. See the Supplies section in the Support Guide on the Interactive Documentation CD-ROM or 
log on to 
 for part numbers of the memory.
Note
If you turn the printer off, the fonts you download are wiped out. You must download them 
again when you turn the printer on again.
Before printing, make sure that the fonts specified in your document are installed in the printer or are set 
up to download correctly. If you request a font in an application that is not resident in the printer, is not 
correctly installed, or is not downloaded from the application sending the print job, the text is printed in 
the most recently used resident typeface.