Xerox Phaser 4600/4620 管理员指南
dc10cc0470
Customer Support
Page 18
• When printing a job with an odd number of pages and duplex front and back imaged covers, the printer always prints
on both sides of the front and back covers. The remaining pages are printed on the document body media type and
color with a blank page inserted to allow an image on both sides of the back cover.
• When using the Blank Front or the Blank Front & Back Cover command, the Cover Media Size command is optional. If
the cover size command is not in the PDL, the printer assumes the cover media size is the same as the document
body.
• Use one of the following methods to specify media selection:
Describe the media attributes with size, color, and type and allow the device to select the matching source tray. If
the media description method is used, leave source tray selection out of the request or set to Auto. If not, the tray
selection defeats the auto tray selection capabilities of the device.
Indicate the tray to supply media. If the source tray method is used, the system automatically defaults paper
type to the defined SYSTEM DEFAULT unless specified otherwise. This prevents inadvertent use of special paper
types. To override, include a paper type specification of UNSPECIFIED in the job.
PS Dependencies/Caveats
• The following media sizes do not print duplex and do not support staple commands: A6, B6, 5 x 7" Postcard (4.5 x 6"),
envelopes and any custom sized media where the page width is less than 5.5". A request to duplex or staple these
media sizes is ignored.
• Jobs that indicate Transparencies, Labels, Envelopes or Tab-Stock do not support duplex commands. The duplex print
request is ignored when any of these media types are used.
• When printing an odd number of pages in a document with duplex front and back imaged covers, the printer always
prints on both sides of the front and back covers. The remaining pages print on the document body media type and
color with a blank page inserted to allow an image on both sides of the back cover.
• When using the Blank Front or the Blank Front and Back Cover command, the Cover Media Size command is optional.
If the Cover Media Size command is not in the PDL, the printer assumes the cover media size as that of the document
body.
• Use one of the following methods to specify media selection:
Describing the media attributes with size, color, and type and allowing the device to select the matching source
tray. If the media description method is used, leave source tray selection out of the request or specifically set to
Auto. Otherwise, the tray selection defeats the auto tray selection capabilities of the device.
Specifically indicate the tray to feed from. If the source tray method is used, the system automatically defaults
paper type to the defined SYSTEM DEFAULT unless specified otherwise. This occurs to prevent inadvertent use of
special paper types. To override, include a paper type specification of UNSPECIFIED in the job.
Examples
Basic PCL/PJL Template
This section illustrates a standard PCL template example that is used to access general
print features. This example lists each feature and the syntax, both PCL commands and
PJL, required to use these features.
Note: This section is only an example that may include features and commands that do
Note: This section is only an example that may include features and commands that do
not exist for this product.
Section 1 (Opening Command, Required for all files)
<ESC>%-12345X@PJL JOB
Section 2 (PJL Set Commands)
@PJL SET RESOLUTION=600
@PJL SET COPIES=1
@PJL SET DENSITY=4
Note:
This print job specifies
the following items:
• Job owner
• Job name
• Heavyweight
• Green paper
• 1 staple
• Sample set
• Draft mode
• Job owner
• Job name
• Heavyweight
• Green paper
• 1 staple
• Sample set
• Draft mode
Note:
The quotations in the Job
Name and Job Owner lines
are required.