Xerox Phaser 4600/4620 管理员指南
Printer Drivers
Phaser 4600/4620
System Administrator Guide
System Administrator Guide
48
21. Click on the Next button.
22. The Printer Sharing Screen appears.
Note
If you will be sharing this printer with other clients, then:
a.
Select Share Name.
b.
Enter a Share Name.
c.
Click on the Next button.
23. Enter the Location (Add a Comment if necessary.)
24. Click on the Next button.
25. Click on Yes to print a test page. Close the Test Page window if necessary.
26. Click on the Next button.
27. Click on the Finish button. The printer driver will install.
28. Verify that the test page is printed at the machine.
AppleTalk Printing
The Internet Services AppleTalk
®
page allows you to configure the machine to support AppleTalk
®
.
Information Checklist
1.
The AppleTalk settings must be correctly configured on the machine.
2.
Locate the CentreWare Print Drivers CD delivered with your machine.
Configure AppleTalk
1.
At your workstation, open the Web browser and enter the TCP/IP address of the machine in the
Address bar.
Address bar.
2.
Press Enter.
3.
Click on the Properties tab.
4.
Click on the Connectivity link.
5.
Click on the Protocols link.
6.
Select AppleTalk in the directory tree.
7.
Click the Enabled checkbox to enable the Protocol.
8.
Type a name for the machine in Printer Name.
9.
Select the required Zone.
10. Click Apply to accept the changes.
If prompted, enter the Administrator’s User ID admin and Password 1111, and click on Login.
11. The settings are not applied until you reboot the machine. Click the Status tab.
12. Click the Reboot Machine button and click OK to reboot the machine. The network controller
takes approximately 5 minutes to reboot and network connectivity will be unavailable during this
time.
time.
Install the Printer Driver
1.
Follow the steps below that are specific to your operating system: