Xerox Phaser 4600/4620 管理员指南

Printer Drivers

Phaser 4600/4620

System Administrator Guide

51

1.

Connect the USB cable to the machine and the other end to your Workstation or laptop. 

2.

Windows will automatically detect the new hardware and install the appropriate driver.

3.

Click on Next.

4.

Ensure that the radio button is selected next to Search for suitable driver.

5.

Click on the Next button.

6.

Tick the checkbox next to Specify a Location. 

7.

Click on the Next button.

8.

Click on Browse to browse for the location of the printer drivers.

9.

Insert the CentreWare Print Drivers CD into your CD drive.

10. Select the required USB printer driver.

11. Select the correct printer model from the list.

12. Click on the Next button. The printer driver will install.

13. Click on the Finish button.

Configure your Printer Driver

Before starting the Installation procedure, please ensure that the following items are available and/or 
the tasks have been performed:

1.

The Phaser 4600/4620 printer driver should be installed on your Windows operating system.

1.

At your workstation, open your Printers folder.

2.

Right-click on the printer.

3.

Click on Properties.

4.

Click on Configuration.

1.

The driver can be set to automatically obtain information on the installed hardware options and 
status of the device.

2.

Click on Bi-Directional Setup. 

3.

Click on Automatic to have the driver automatically configure the IP address of the device or click 
on Manual and enter the IP address or host name of the device.

4.

If you want to change the default SNMP settings, click on SNMP Community Name and enter the 
required information.

5.

Click on the OK button.

1.

If Bi-directional Setup is enabled, the driver will update with the options installed on the device. 

2.

If Bi-directional setup is not enabled, select the options that are installed on your device.